 |
RAWCHEM
22146
PAC
Polyaluminium Chloride
Aluminium Hydroxy Chloride
1327-41-9
79.44
AlClHO
215-477-2
28273200
Appearance: white solid powder
Solubility: easily soluble in water
Properties:
PAC is Polyaluminium Chloride, spray drying type, white powder, used for drinking water treatment and paper mills as retention agent, work as coagulant for water treatment. It is made by purity raw materials of Al(OH)3. Food grade.
Can be used widely for industrial application.
Easily soluble in water; dissolves rapidly.
Cost is very low, very competitive than other general coagulants.
Dosage will be less (20-50%) than drum dried PAC.
Floc forming fast, good activity, good filtering.
Don't need adding alkaline additives, if deliquescence, its effect remain same.
Adapted for a wide pH value, strong adaptability.
The Salt content in the effluent will be reduced after use PAC.
Can remove the water pollution of heavy metals and radioactive substances.
The active ingredient of high, convenient storage and transportation.
Main indexes:
Coagulant for different industrial area
Clarifying agent in waste water
Sludge thickening agent
Usage:
Suggested to dilute to the concentration of 2%-20% solution before use.
For Solid PAC product, dilution is necessary before being dosed, water amount for dilution shall be determined based on the amount of the chemicals to be dosed and the quality of water to be treated.
For Solid PAC products, the dosage is about 1-15g/mt, the dosage of liquid PAC is 3-40g/mt, the best dosage is based on different lab test results.
We normally list 24 months as the shelf life in our COA, the real shelf life is actually much longer than 24 months if it's stocked in good condition (bags are sealed enough, away from direct sun-light, moisture and other incompatible chemical materials).
Appearance: white solid powder
Solubility: easily soluble in water
Properties:
PAC is Polyaluminium Chloride, spray drying type, white powder, used for drinking water treatment and paper mills as retention agent, work as coagulant for water treatment. It is made by purity raw materials of Al(OH)3. Food grade.
Can be used widely for industrial application.
Easily soluble in water; dissolves rapidly.
Cost is very low, very competitive than other general coagulants.
Dosage will be less (20-50%) than drum dried PAC.
Floc forming fast, good activity, good filtering.
Don't need adding alkaline additives, if deliquescence, its effect remain same.
Adapted for a wide pH value, strong adaptability.
The Salt content in the effluent will be reduced after use PAC.
Can remove the water pollution of heavy metals and radioactive substances.
The active ingredient of high, convenient storage and transportation.
Main indexes:
Coagulant for different industrial area
Clarifying agent in waste water
Sludge thickening agent
Usage:
Suggested to dilute to the concentration of 2%-20% solution before use.
For Solid PAC product, dilution is necessary before being dosed, water amount for dilution shall be determined based on the amount of the chemicals to be dosed and the quality of water to be treated.
For Solid PAC products, the dosage is about 1-15g/mt, the dosage of liquid PAC is 3-40g/mt, the best dosage is based on different lab test results.
We normally list 24 months as the shelf life in our COA, the real shelf life is actually much longer than 24 months if it's stocked in good condition (bags are sealed enough, away from direct sun-light, moisture and other incompatible chemical materials).
